To start the process of setting up your Canon Inkjet Printer, please follow the procedures below.
1- The very first step in this process is to use a computer, a laptop or a PC.
2- Now, open your device’s web browser, you can open for any browser such as Google Chrome, Internet Edge or Mozilla Firefox.
3- Locate the address bar in the top panel of the window. In the “http//ij.start.canon” address bar, click Enter.
4 - You will now be taken to the website homepage. You can see tabs on the homepage for various procedures. You will click on the icon “Setup.”
5- You are taken to a new tab when you click on it. You must enter your model number here. You can either type your model number manually or use the click select option on the same page in the lower panel.
6- When you enter the model number and press enter, the setup instructions for your specific model will be shown. Follow the steps on your screen.
Hardware Setup
1- Before you do the setup, you first need to complete the hardware setup process of your device.
View Website
View Website
View Website
2- Unbox your printer the same way you see in your printer video tutorial that is available on the ij.start.cannon site.
3- Connect your printer unit to the power supply using the power cable and switch on your printer.
4 - You now need to save the printer’s initial settings. It means that you need to set your preferences, such as the language, date, place and time of the control panel.
5- The tutorial in the video at ij.start.cannon will direct you through the steps you take to load the cartridge and follow the document carefully.
Downloading the Driver
1- After you have done all the hardware set-up procedures, as requested by ij.start.cannon, the driver software has to be downloaded.
2- You must now select the second step in the same window that has guided you through both previous steps, i.e. “Download the Driver Software.” Click on this link.
3- Once you click on this link, your file will start to be downloaded. This download can be checked in the Footer bar in the browser window.
Setup your printer device
1- When the Hardware Setup is completed and the printer driver software is downloaded in the instructions in “ij.start.cannon,” select the next step i.e. the configuration of your device part.
2- You must first make sure that your printer is switched on to start this process. Check if the green light on your device is enabled.
3- After double-clicking the downloaded software, the “User Control Wizard” will appear on your screen. To allow the software to run on your computer, click the “Start” button here.
4- You now have the “Welcome Window” of the driver software. Click on the ‘Next’ button. You now need to follow your setup guide step by step. You will now follow this guide in the same way that you followed the ij.start.cannon guide.
5- A screen will be displayed on your device to ask you to choose between a USB or wireless link.
6- Click on the ‘Connect to Network’ icon on the next window on your screen.
7- In the next tab, you can select the connection form you want to use. In general, this approach uses wired or wireless. Tap the “Cables Setup” icon here.
8- When the “Connect via wireless setup” display appears, the Wi-Fi button of the printer must be pushed down. Do this before the orange warning light blinks 2 times and click the button after the second blink.
9- Make sure the Wi-Fi Blue Color blinks quickly and press the Next button. In this process, your network link is temporarily “disabled.” Wait some time to connect your printer device.
10- You now need to enter your geographic region in the next window on your app. After you have selected, press “Next.”
11- You have to select your place of residence on the next screen and then press “Next.” The next screen to appear is the “Software Installation List” You have to pick the app you want to install here. You can also uninstall the software you need if you have any confusion about which software you want to install at this stage. After the software has been selected, click “Next.”
12- You are now assigned to “Text of the License Agreement.” Select “Yes” later on in this document if you agree to all terms.
13- Consequently, an “Allow Install Wizard Process” window appears on your screen. Click the “Next” button again.
14- The window below shows your printer model and the wireless network name (or SSID). Here click “ Complete.
15- Eventually, now you can see that your Blue lamp stops blinking, which means your setup for Windows users is complete.
Mac users need few additional steps
- You will be prompted by the next window to add your printer to your Mac device. Click on the “Add Printer” click to proceed.
2- Consequently, you can see the available printer devices on the next page. Pick your printer device model number from this list. The same one that you entered to start the entire process in ij.start.cannon. Then, click the “Add” button.
3- Click “Next” to finish the process.
4- With this, the Mac wireless Setup completes
Most Canon printers are very practical in nature and therefore easy to install by canon ij setup – they are mainly installed automatically on centrally advocated PCs and are available to the audience in accordance with their wish.
Installing a New Canon Printer from canon ij setup
When the new canon printer is tried to install as per canon ij setup rules is given following steps are needed:
1- Start menu and go to Install Printers (canon ij setup) in the HY Segment. You have to search for the printer miniature on the list and simply click on it.
2- Then a very important step you have to focus on is to set the printer number correctly in the search field.
3- Hit search button.
4- You’ll see serial numbers in a black colored case. Serial number 1 may request the printer’s search criteria, like adding, for example, the number or the street address of the Canon printer, etc.
5- Click the search button to find the printer.
6- From there, you’ve got to switch to the printer option you want.
7- Click on the install option finally
8- Happiness warning: You can actually install more than one printer at a time
9- Confirmation message will be sent to you revealing that the process was a success
10- Now you have to search for the default from the list of printers. Jump from the same start menu to Devices and Printers.
11- If you want to change the default printer at that time, you can do so instantly.
12- Just pass to the printer that you want to make as default, and then click it with the mouse’s secondary button.
13- The printer you selected will be shown with a green colored tick underneath and then you are all set.
14- the canon printer is installedas per rules of canon.com/ijsetup.
Canon Printer Wireless Setup (canon.com/ijsetup) Guide
Canon Wireless Printer Setup involves various steps to configuration and how to connect this printer via wireless mode to the computer or smart devices.
You can easily share documents, photos, videos and so on with friends or neighboring systems using this canon.com/ij setup without using the USB.
What Are The Requirements For Connecting The Canon Printer To Wireless Network?
In this topic, we can see the requirements that we should have before canon setup, and then connect the printer to the wireless network via ij.start.canon setup process.
You must have an access point such as a modem, router or a Wi-Fi modem. And you must always make sure that the link given in these access points working properly. Then at least you have to have a smart device or computer that is connected to the internet to setup the canon ij. To ensure your computer is connected to the internet, open your browser and type the canon com/ij extension, which opens all details on canon.com ijsetup.
These are two important factors that you should consider before setting up the canon. You can connect the canon printer to your smart devices after checking these things.
Comments (0)